Grinding of Inlet and Exhaust Valve Spindles for medium speed/high-speed diesel and gas engines.
- The Valve Spindle is inserted vertically into the Centering Chuck.
- Centering is fast and easy.
- Facilitates various sizes Valve Spindle stem diameters
- Change of grinding angles is simple and several angle settings are available
- Cutting feed is set at a minimum.
- Grinding of smaller Valve Seats is possible.
Valve Spindle grinding
Valve Seat Ring grinding
Valve Stem diameter:
800 x 850 x 450 (mm)
900 x 900 x 450
Grinding Angle Fine Adjustment, ±0.1 to ±1.0, is incorporated
Single phase 100/110V 50/60Hz or single phase 200/220V 50/60Hz
1100W, 50Hz = 3000 min-1, 60Hz = 3350 min-1
90W, 0-120 min-1, reversible directions